Click on the image to check the artwork
Glazed roof sheets made of glazed roof panel roll forming machines have the characteristics of light weight, high strength and durability.
The chart of process flow
Decoiling- active feeding- roll forming- measuring length- cutting to length- product to stand.
Machine parameters
1 |
Main motor power |
4kW, 3 phase or as your requests |
2 |
Hydraulic motor power |
3kW |
3 |
Hydraulic pressure |
10-12MPa |
4 |
Voltage |
380V/ 3 phase/ 50 Hz (or as your requirements) |
5 |
Control system |
PLC delta inverter |
6 |
Main frame |
300/350 mm H-beam |
7 |
Backboard thickness |
16 mm |
8 |
Chain size |
1 Inch |
9 |
Feeding material |
color steel coils |
10 |
Feeding thickness |
0.3-0.8 mm |
11 |
Productivity |
0-15/ min |
12 |
Roll station |
13 roll steps (according to different design) |
13 |
Roller diameter |
70 mm (depends on different design) |
14 |
Roller material |
45# steel |
15 |
Cutter material |
Cr12 |
16 |
Cr-plating size |
0.05 mm |
Advantages:
1, Forming machine rollers are manufactured from high quality bearing 45 # steel (not A3 steel), which make roller more wearable and longer life;
2, The shell of the forming machine is made of H-shaped steel (non-angle iron). The machine runs smoothly and avoids Vibration Affecting the forming accuracy.
Machine packaging:
1. Steel glazed roof tile roll forming machine is covered by plastic film.
2. PLC control box, spare parts and other small parts are packed by wooden carton box.
http://www.roll-forming-machine-china.com/